Our technology

Talofa bloggers welcome back to another blog. Today I will be talking about a technology  in our class room. There are  three rooms and we had to do each station and the three stations. The first station was put a technology challenge. We had to make our marble stay on our bridge,  we had  limited time and we had to make our bridge as long and if it was long then we would win.

Our second challenge was we had to make a circuit with an L.E.D light and with a small battery. We had to make our small L.E.D light go on by using some stuff to make our light switch on and we used spilt pins and we used cardboard papers and pins. We had to make our L.E.D lights turn on by using a battery.

Our third challenge was to make a Geo Board out of wood, nails, saw to cut the wood. So first we cut the wood in to four pieces of wood then we went to put dots on our wood so we can see were we are going to put the nail in and when we were finished we could go outside and hammer the nails into the wood and once we were done we could put some rubber bands on the nails and create a pattern.

My favourite thing to do out of the technology was the Geo Board because we got to use a saw to cut the wood and doing the hammer.

  Thanks for looking at my blog and blog u later.